Aller au contenu

Utilisateur:Pierre Chanial/Grandeurs physiques

Une page de Wikipédia, l'encyclopédie libre.

The primary dimensions of physical quantities are arbitrary and depend on the choice of units. I is usually based on the base units of the International System of Units.

Other dimensions, such as force rather than mass, or charge [Q] rather than current [I], could be used. Even the number of dimensions is not fixed. In the three-base unit cgs system, for example, the units of charge are erg½ cm½ and the dimensional analysis of this quantity in terms of base units is [M]½ [L] [T]-1, whereas in the analysis below charge has units of [I][T]. Grandeur dérivée Also note that the symbols are not International Standards and may be used differently than shown here.

Grandeur de base Notation Unité (SI) Symbole Description
Masse kilogramme kg Quantité de matière d'un objet. extensive
Position mètre m Coordonnées spatiales.
Date seconde s Coordonnée temporelle.
Intensité électrique ampère A Rate of flow of electrical charge.
Température kelvin K Average kinetic energy of particles in an object. intensive
Quantité de matière mole mol Number of particles compared to the number of atoms in 0.012 kg of 12C. extensive
Intensité lumineuse candela cd Amount of energy emitted by a light source in a particular direction.
Angles Notation Unité SI Symbole Description
Position angulaire radian rad Coordonnée angulaire
Angle solide stéradian sr
Grandeur dérivée Notation Unité SI Symbole Description
Superficie m2 The two dimensional extent of an object.
Volume m3 The three dimensional extent of an object. extensive
Fréquence hertz Hz=s-1 The number of times something happens in a period of time.
Moment d'inertie kg m2
Densité linéique kg m-1 Quantité de masse par unité de longueur
Densité superficielle kg m-2 Quantité de masse par unité de surface
Densité volumique kg m-3 Quantité de masse par unité de volume intensive
Vitesse m s-1 Taux de variation de la position
Vitesse angulaire s-1 Taux de variation de la position angulaire
Accélération m s-2 Taux de variation de la vitesse
Accélération angulaire s-2 Taux de variation de la vitesse angulaire
Force newton N=kg.m.s-2 Cause externe d'accélération
Moment d'une force T N m = kg m2 s-2 Product of a force and the perpendicular disatance of the force from the point about which it is exerted. vector
Quantité de mouvement kg m s-1 Produit de la masse d'un objet par sa vitesse extensive
Moment cinétique kg m2 s-1
Pression pascal Pa = kg m-1 s-2 Force exercée par unité de surface. intensive
Énergie joule J = kg.m2.s-2 The capacity of a body or system to do work. extensive, scalar, conserved quantity
Densité d'énergie J.m-3= Quantité d'énergie par unité de volume
Puissance watt W = kg m2 s-3 Taux de variation de l'énergie
Vecteur radiant ou de Poynting W.m-2 = Flux d'énergie
Electromagnétisme
Charge coulomb C = A s Quantité de charge électrique extensive, conserved quantity
Densité linéique de charge C m-1 Quantité de charge par unité de longueur
Densité superficielle de charge C m-2 Quantité de charge par unité de surface
Densité volumique de charge C m-3 Quantité de charge par unité de volume intensive
Densité de courant A m-2
Densité superficielle de courant A m-1
Champ électrique V.m-1 =
Champ magnétique tesla T =
Flux magnétique weber wb = kg s-2 A-1 Measure of quantity of magnetism, taking account of the strength and the extent of a magnetic field.
Potentiel scalaire volt V = J.C-1 = kg.m2.s–3.A–1 Potential difference across a conductor when a current of one ampere dissipates one watt of power. scalar
Potentiel-vecteur T.m =
Capacité farad F =
Résistance,Impédance,Réactance ohm = kg·m2·s–3·A–2 the degree to which an object opposes the passage of an electric current. scalar
Conductance,Admittance,Susceptance siemens S =
Résistivité .m
Conductivité S.m-1 =
Polarisation C.m-2 =
Aimantation A.m-1
Excitation électrique C.m-2 =
Excitation magnétique A.m-1